10
LOADING A FILM
Loading a film
›
Open the back of the camera (23) using the
unlocking button (9).
›
Place the film in the film compartment, push
it in firmly and pull out the film until the
beginning of the film reaches the take-up
spool.
›
Make sure the film is lying flat on the film
guide.
›
Close the back again and the motor will
automatically advance the film to frame 1.
›
If the film has been correctly loaded, the
display will show frame 1.
›
If not, open the back again and repeat the
loading procedure as described above.
Note:
The camera is designed for DX-coded 35 mm
film. The film speed is set automatically within
the range ISO 50/18° to 3200/36°.
Never insert the film in direct sunlight.
Comments to this Manuals