Rollei flex 2.8F User Manual download pdf (Page 33)

Using the Rolleikin

Inserting the Rolleikin Focusing Screen Mask:

To remove the hood : press the spring catches on either side of the hood and

slide hood towards rear [1]. - To replace: press hood down on track and slide

forward until it locks.

To lift the focusing screen : take hold of the two sides of the frame, pull

backwards slightly and lift [2]. - Close by pushing downward.

Inserting the focusing screen mask : drop into place so that the notch and

punched holes fit over the studs provided [3]. The Rolleikin mask is now

coupled to the automatic parallax correction of the camera.

Adjusting the film pressure plate (→ page 9): slide plate downward until

inscription 1 x 11/2" (24 x 36 mm) is visible.

Adjusting the eveready case to the larger diameter of the Rolleikin counter

knob: remove leather insert at the left side after bending the metal retaining

clips upward. For more detailed information, please refer to the Rolleikin

instruction sheet.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38

No comments

Rollei flex 2.8F User Manual Page 33